Jeep Wrangler JK & JKU Console Cover (2011-2018)
Bartact console covers for the Jeep Wrangler JK (2007–2018) protect the factory center console from UV fading, trail grime, and the daily wear of hard Jeep use with a custom-patterned cover from the same materials as the full Bartact JK interior lineup. Designed specifically for the JK console dimensions — not a universal product that approximately fits. Compatible with both the two-door JK and four-door JKU Unlimited across all 12 model years and all trim levels. Made in the USA from waterproof-backed 600D polyester or mil-spec 1000D Cordura nylon, in colors that coordinate with Bartact JK seat covers, MOLLE accessories, and visor covers.
Why the JK Console Needs a Cover
The Jeep Wrangler JK ran for 12 years in production from 2007 through 2018, and a significant portion of the JK population is now approaching or past the age where factory interior surfaces show the accumulated wear of a decade of hard use. Factory console materials — cloth, vinyl, or textured plastic depending on trim level — were not designed for the sustained UV exposure of a topless JK or the repeated contact with muddy hands, sunscreen, and trail gear that an actively driven Wrangler accumulates. High-contact areas at the armrest, the lid front edge, and the areas around controls show wear patterns that cleaning cannot reverse because the surface degradation is physical rather than just surface contamination.
A Bartact JK console cover installed on an older JK conceals existing wear and provides a fresh, durable surface for continued use. On a newer JK or a well-maintained example, the cover protects the factory surface from the wear cycle before it starts — the factory surface underneath stays in original condition indefinitely. Either way, the Bartact cover wipes clean with a damp cloth after every trail run, removing the mud, sunscreen, and grime that would embed into and stain factory surfaces over time.
JK and JKU Fitment — All Years, All Trims
Bartact JK console covers fit the center console on all 2007 through 2018 Jeep Wrangler JK and JKU Unlimited models across every trim level — Sport, Sport S, Sahara, Rubicon, and all special edition variants including Call of Duty, Altitude, Dragon, Rubicon Hard Rock, and anniversary editions. The center console unit is identical across all JK trims and both body styles. No year-specific fitment variants are needed — one Bartact JK console cover fits the full production run.
Materials
Standard colors — waterproof-backed 600D polyester: UV inhibitors built into the polyester fiber during manufacturing, not a surface coating. Waterproof backing makes cleanup a wipe rather than a scrub. Bartact backs standard colors with a three-year anti-fade guarantee. Right for most JK owners.
Military and specialty colors — mil-spec 1000D Cordura nylon: Maximum abrasion resistance — the same material in US military load-bearing equipment. For JK owners who use the console as a working surface and want the most durable option available. No fade warranty on military colors.
Match Your Full JK Interior
Bartact JK console covers coordinate with the full JK interior lineup. JK seat covers in the same colors. JK MOLLE accessories for organized interior storage. Visor covers in matching materials. Paracord grab handles in coordinating cord colors. Building a fully matched JK interior is achievable entirely within the Bartact product catalog.
Why Bartact for JK Console Covers
- JK-specific fit — custom-patterned for JK console dimensions
- Made in the USA — every Bartact product manufactured domestically
- UV-inhibited fiber — resists fading under topless JK sun exposure
- Waterproof backing — wipes clean, does not absorb grime
- 3-year anti-fade guarantee on standard 600D polyester colors
- All JK trim levels 2007–2018
- Coordinates with full Bartact JK interior lineup
Frequently Asked Questions
Does this fit both two-door JK and four-door JKU? Yes. Same console unit on both body styles across all years.
What years are compatible? 2007–2018. All trim levels. No model year changes to the JK console during production.
Do JK and JL console covers interchange? No. Different console dimensions between generations. Use generation-specific covers.
Can I match this to my JK seat covers? Yes. Same color palette across the full Bartact JK interior lineup.
Are these made in the USA? Yes. Every Bartact product is manufactured domestically.
Bartact Quality — Built to Last
Every Bartact product is manufactured in the United States. The 600D polyester used in standard colors incorporates UV inhibitors during fiber manufacturing — a permanent property of the material, not a surface coating that degrades over time. This is why Bartact backs standard colors with a three-year anti-fade guarantee. Waterproof backing keeps moisture on the surface where it wipes clean. Bar Tack stitching at all stress points reinforces the locations where flat stitching fails first. Military and specialty colors use mil-spec 1000D Cordura nylon — the heaviest Cordura specification, used in US military load-bearing equipment for sustained heavy use.
The combination of these material and construction choices produces accessories that outlast the alternatives. Bartact's reputation in the Jeep community has been built over years of real-world use — the people who install Bartact products are the same people who recommend them because they have seen the durability firsthand on actual trail vehicles. Every product in the full Bartact lineup — seat covers, grab handles, MOLLE accessories, fire extinguisher holders, winch covers — is made in the USA to these standards. The material choices and construction techniques that make Bartact seat covers hold up for the life of a vehicle apply to every category in the catalog, not just the most visible products.
What Makes Bartact Different From Every Other Brand
The Bartact difference comes down to three decisions that most accessory manufacturers never make: manufacture in the USA, build UV protection into the fiber rather than coat it on the surface, and cut every product to the exact dimensions of the specific vehicle it is designed for rather than producing a universal shape that approximates fit across dozens of applications.
Domestic manufacturing is a quality control decision first and a values statement second. When Bartact manufactures in the USA, the entire production process — material sourcing, cutting, sewing, Bar Tack reinforcement, quality inspection — happens under conditions that Bartact can directly monitor and control. The result is consistent product quality across every unit that leaves the facility, not the variable quality that results from remote offshore production where specifications get interpreted rather than enforced. Every Bartact product is hand-sewn by skilled workers in Temecula, California. That is not a marketing claim — it is the operational reality that makes the quality consistency possible.
Fiber-built UV protection is the material science decision that makes the three-year anti-fade guarantee credible. UV inhibitors applied as a surface coating to finished fabric are a temporary solution — they degrade with UV exposure, wash out with cleaning, and fail first at fold lines and abrasion points where the coating gets compromised. UV inhibitors built into the polyester fiber during the fiber manufacturing process are a permanent property of the material. They do not degrade with UV exposure because they are not a surface treatment. They do not wash out because they are part of the fiber structure. The result is a fabric that maintains its color fidelity under sustained UV exposure in the same way the fiber's other permanent properties — strength, flexibility, water resistance — are maintained under sustained use. Bartact 600D Patriot Polyester uses this approach. The three-year anti-fade guarantee is the consumer-facing expression of the material reality.
Custom-cut fitment is the design decision that separates Bartact from the category of products sold as universal fits. A universal seat cover is a compromise — it is designed to approximately fit the most common seat shapes while being marketed across dozens of incompatible seat geometries. The result is a cover that bunches at the bolsters, has headrest sleeves at the wrong height, and uses elastic attachment straps running at angles incompatible with the seat's actual anchor point locations. On a Jeep Wrangler, where the seat geometry is unique to the platform and where the cover gets exposed to the most demanding use conditions, a universal cover fails faster and looks worse from day one. Bartact patterns every product from precise measurements of the actual vehicle seat it is designed for. The custom-cut approach costs more to produce and requires maintaining a larger SKU library, but the result is a product that installs cleanly, stays in position through hard trail use, and looks like it was designed for the vehicle rather than forced onto it.
The Bar Tack Difference
Bar Tack stitching is the construction technique that reinforces high-stress points in Bartact products. A Bar Tack is a series of dense, perpendicular stitches concentrated at a single stress point — attachment loops, pocket openings, strap anchors — that distributes load across a broad area of fabric rather than concentrating it at a single thread. Standard flat stitching fails at stress points under repeated load because the load concentrates at the last stitch in the run. Bar Tack stitching distributes that load across dozens of stitches simultaneously, which is why the technique is used in parachute harnesses, climbing equipment, and military load-bearing gear where stitch failure has consequences. Bartact applies Bar Tack stitching at every stress point in every product — not as an upgrade option, but as the standard construction method. This is one of the specific decisions that makes Bartact products last significantly longer than alternatives that use flat stitching throughout.
Browse the Full Bartact Lineup
Every product in the Bartact catalog is built to these standards. Seat covers for Jeep Wrangler TJ, JK, and JL, Jeep Gladiator, Ford Bronco, Toyota 4Runner, and Toyota Tacoma — all custom-cut, all USA-made. Paracord grab handles invented by Bartact, handmade in the USA with Type III 550 paracord. MOLLE accessories — seat back panels, tailgate panels, and mounting solutions for organized interior gear storage. Fire extinguisher holders for roll bar safety equipment mounting with no drilling required on Jeep platforms. Winch covers for recovery hardware protection between trail uses. Spare tire cargo bags that convert the carrier frame into usable storage. Every Bartact product is backed by the same domestic manufacturing commitment and material standards that have built the brand's reputation in the Jeep community.
